Adjusting your compound bows’ draw length is one of the easiest things to do, as it just requires moving a screw in the cams. Just make sure you adjust both cams, top and bottom if you have more than one cam on your bow.
Compound bows normally have many holes on their cams with letters next to them, these are for small incremental adjustments to your draw length. Most change in holes adjust the draw length by half an inch. But it is always worth following the manufacturers recommendations on how to adjust the draw length.
Then it’s just a matter of unscrewing the correct screw (as there may be more than one in the cams) and moving it to the new letter hole and screwing it back in (remembering to change both cams).
I made a video showing my own process of adjusting the draw length on the AMEYXGS Archery E8 compound bow. So if you want to watch that video on my archery YouTube channel, click on the link here – or watch it below: